Holzschutz Dismantling fluid BIO90
"Holzschutz"  dismantling fluid is a top-quality emulsifiabe de-moulding oil that guarantees easy removal of concrete and a long panel life. Surfaces  treated with "Holzschutz"  are protected by a resistant film that ensures  optimum  finishing of the  constructions. This newly-designed product    features     high    biodegradability    and     total   absence    of nonylphenols,    which   are   replaced   with   plant-derived   emulsifying agents. This product has been developed and enhanced to comply with the most recent regulations related to environmental impact  -  Directive 2003/53/EEC. This  dismantling fluid  easily emulsifies in water, 1 to 20 ratios  (on new formworks,  1 to 10  ratio is recommended the same as for formworks used in dry or salty environments or when exposed to the sun).   Once  it  has  emulsified,  this agent  becomes  a  semi-fluid and milky   paste  that  can  be  easily  poured  and  has good  stability.   The product is packed in 25-l plastic drums. Estimated yield: 25 ÷45 sqm per litre of dismantling fluid
Use:
- slowly  pour the  product into water,  shake  mechanically until a stable   milk-white emulsion is obtained;
- use  the  recommended  quantity;  the  emulsified  concentrate can  be   stored for long periods;
- it   is  advisable   to  store   the  product   in  closed  rooms;  close    the   packaging after use;
- avoid exposures to temperatures below 5 °C.

Holzschutz Dismantling fluid WOOD/IRON
It is an integral dismantling fluid for iron and iron-wood formworks, with special additives that protect iron parts of formworks against rust and corrosion caused by special environmental conditions (e.g. mist, salty environment) or not-frequent use. Suitable for every type of cement constructions, to be used for de-moulding structural and public use elements such as: floors of clay/cement mix, exposed walls, slabs, etc. It should be used undiluted and, thanks to its low viscosity, it can be sprayed or applied with a scrubbing-brush, also using a hand-operated pump. It does not have ‘toxic/harmful’ components; it is advisable to comply with the use instructions for dismantling fluid. Avoid exposing the emulsion and the product to temperatures below 5° C.
Inflammable over 160 degrees. Packed and supplied in 25-l plastic drums. Estimated yield: 40÷60 sqm per litre of dismantling fluid.