Watch the video of the KIT system
To build a wall of approximately 100 square meters using the KIT system, the following products in the indicated quantities are needed: |
| |
|
|
n.2 KIT modules 1,00x2,85 m.
n.2 KIT modules 1,50x2,85 m.
n.4 KIT modules 2,00x2,85 m.
n.4 KIT modules 2,50x2,85 m.
n.4 KIT modules 3,00x2,85 m. |
| |
|
|
|
| |
|
|
n. 30 Regular union vices |
| |
|
|
n. 6 Compensated union vices |
Comfortably working on the ground, by using omega and U-irons, in a couple of minutes the rigid and compact modules can be assembled and handled as one piece, casting after casing. |
|
Assemble modules of the required height; their lengths are 1.00 – 1.50 – 2.00 – 2.50 – 3.00 m. |
|
Modules are assembled one after the other and joined using an union vice.
|
|
Sizes intermediate to 50 cm are compensated with compensating union vices and extension sheets or timber. |
|
To obtain an internal angle, assemble the internal angular element between two modules.
|
|
To obtain an external angle, assemble the external angular element between two modules.
Internal and external angles are adapted to the wall thickness using ashalar work extensions . |
|
The formwork is finished with props for sealing and supports for gangways. |
|
Watch the video giving instructions to assemble a KIT system
|